Important Notice:
Please note that the current installation video is for the USB-C version of the bike. However, the installation process for the HDMI version is largely the same and can be followed as a reference. The main difference lies in the cable port, but the installation steps for both versions are almost identical. We are currently in the process of creating a dedicated installation video for the HDMI version and will make it available soon.
Indoor Bike Installation Notes
Before Installation
• Please carefully read the user manual and watch the installation video before starting to ensure you understand all steps
• After unpacking, check that all parts are included and free from shipping damage
• Install the bike on a flat, stable, and dry surface to prevent tilting or slipping
During Installation
• Follow the order shown in the user manual or installation video. Do not skip or reverse steps
• When installing screws, align and lightly tighten them first. Fully tighten all screws only after assembly is complete
• Do not overtighten screws during installation to avoid stripped threads or component damage
• Keep children and pets away from the installation area to prevent accidents
After Installation
• Recheck that all screws and bolts are securely tightened
• Before adjusting the seat, handlebars, or pedals, make sure all locking mechanisms are fully secured
Special Notes (Important)
• Both left and right pedals must be tightened toward the front of the bike
• Pedal nuts must be tightened toward the rear of the bike. Do not tighten in the wrong direction, as this may damage the threads
• When connecting cables, ensure the connector pins are perfectly aligned in a straight line to avoid bending
• Push the connector fully in until it is firmly seated and locked to ensure stable connection and prevent poor contact
If the issue persists after following the above steps, please submit a service ticket to get support from our customer service team. You can submit your request here: Submit a service ticket
Comments
0 comments
Please sign in to leave a comment.