Installation Video-T3S Plus

Treadmill Installation Notes

Before Installation
• Carefully read the user manual and watch the installation video to understand the full assembly process
• After unpacking, verify that all parts are included and undamaged. Do not proceed if any parts are missing or damaged—contact customer support
• Place the treadmill on a flat, stable, and dry surface. Avoid uneven or slippery areas

During Installation
• Follow the steps in the manual or installation video. Do not skip steps or change the assembly order
• Lightly tighten screws first to align parts. Fully secure all screws only after assembly is complete
• Do not overtighten screws to prevent stripped threads or component damage
• Keep children and pets away during assembly to prevent accidents
• When connecting cables, ensure all pins are straight and fully inserted to secure connections

After Installation
• Double-check that all screws, brackets, and folding locks are fully tightened
• Before connecting power, ensure the voltage matches local standards and the power cord is undamaged
• Run the treadmill without load for 1–2 minutes to confirm smooth operation and no abnormal noises
• Before adjusting settings (speed, incline, etc.), make sure all locking mechanisms are secure

Special Notice
• Warning labels are attached on the treadmill. When releasing straps or unfolding, keep hands clear to avoid being pinched by folding support components (gas struts)