Machine Adjustment – Tilted Screen

If your bike screen appears tilted, please follow the steps below to check and adjust:

Reference Video – Adjusting Tilted Bike Screen

Step 1: Check the Mounting Screws

• Locate the mounting screws where the screen bracket connects to the handlebar.

• Use a screwdriver or Allen wrench to check if they are loose.

• If loose, tighten the screws.

 Note: Do not over-tighten to avoid damaging the screws or bracket.

Step 2: Re-adjust the Screen Angle

• Loosen the mounting screws (do not remove them completely).

• Straighten the screen so that it is level with the ground or handlebar.

• Once aligned, re-tighten the screws to secure it.

Step 3: Inspect the Bracket

• If the screws are tightened but the screen is still tilted, possible causes include:

  1. Bracket deformation;

  2. Incorrect installation position.

• Remove the bracket and re-install it according to the user manual to prevent further misalignment.

Step 4: Contact Customer Support

• If the issue cannot be resolved after following the steps above, please submit a service ticket to get support from our customer service team. You can submit your request here: Submit a service ticket