Troubleshooting – Wobbling or Tilted Seat

Adjusting the Seat – Fixing Seat Wobbling Issue

If you feel that the seat is wobbling or loose during riding, it is usually caused by the seat fixing screws not being fully tightened or the installation position not being properly adjusted. Please follow the steps below to check and adjust the seat.

Tools You Will Need

Please prepare the following tool from the bike accessory package:

• Open-ended wrench, 13–15#

  

Reference Video

👉 Seat Adjustment Video Guide

Step 1: Loosen the screws

• Use a 13mm wrench to turn the screws located on both sides under the seat counterclockwise.

• Once loosened, you can adjust the seat position forward/backward and left/right.

Step 2: Adjust and tighten

• After adjusting to the proper position, first pre-tighten one side screw, leaving about half to one full turn of clearance.

• Then, fully tighten the screw on the other side.

• Finally, go back to the first side and tighten the remaining clearance completely.

Step 3: Final check

• If you feel the screw cannot be turned further, please apply greater force.

• If you still cannot complete the adjustment after trying, contact customer service for assistance.You can submit your request here: Submit a service ticket.