Bike Maintenance & Safety Instructions

Safety first: Always power off and unplug the machine before cleaning or performing any maintenance. Do not use corrosive or solvent-based cleaners.

1. Daily Cleaning

• Wipe the frame with a dry or slightly damp cloth to remove sweat and dust.

• For the screen, use a soft, dry cloth or a professional screen cloth. Avoid alcohol, gasoline, or other solvents.

2. Screen & Electronics

• Regularly check that power and data cables are firmly connected.

• Keep the screen area well ventilated.

• If the machine will not be used for a long period, unplug it.

• Keep software/firmware up to date.

3. Key Component Checks (Weekly)

• Check and tighten screws on pedals, saddle, and handlebars.

• Inspect pedal straps and saddle surface for wear; replace worn parts promptly.

4. Lubrication & Basic Care (Every 3–6 months)

• Apply a small amount of lubricant to drivetrain/rotating parts every 3–6 months as needed.

• Avoid using or storing the machine in humid environments.

5. Deep Maintenance (Every 6 months)

• Remove dust from the machine housing and ventilation openings.

• Ensure the back of the screen has adequate airflow.

• If unused for a long time, cover the unit with a dust cover.

6. Warranty Reminder

Damage caused by improper maintenance or misuse may not be covered under warranty. Please read the user manual carefully and follow the recommended maintenance procedures.